Farms.com Home   News

Early Spring Is Time For Machinery Preparation.

By Emma Hopkins, Purdue University

Early spring is the optimal time to prepare farm equipment and make repairs for a smooth planting season, a Purdue University agricultural machinery specialist says.

Robert Stwalley, assistant clinical professor in agricultural and biological engineering, says tuning equipment now can prevent problems later.

"Instead of wishing for sunnier days and warmer weather, the wise farmer uses the gray and cold times to be ready to hit the fields running when the seasons change," Stwalley said.

 There are four main steps in machinery preparation, Stwalley said. These are cleaning, verifying functionality, calibration and testing the monitoring systems.

Preparation should start with cleaning machines thoroughly with soap and water to remove dirt, chemical buildup, excess grease and plant material. While cleaning, farmers can also note any parts needing repair.

Next, farmers should carefully disassemble and inspect all material distribution components such as seed delivery mechanisms, fertilizer applicators, herbicide nozzles and insecticide distributors. These parts should be handled with care since some are delicate. Before reassembling, operators should ensure that all parts are functioning correctly on their own.

Each distributing mechanism on planters must be calibrated. To do this, farmers must lower the planters far enough for those mechanisms to engage, then run the machine at operational speed for a set distance. At the end of that distance, the number of seeds dropped should be counted or the dispensed material output weighed. If the distribution numbers are off, the machine needs to be recalibrated and tested again at the same distance.

It is also essential to test the monitoring and data-collecting systems on planters to ensure data collection is accurate. Collecting data is a key component of precision agriculture and often involves electronic sensors. To be sure that planting information is recorded accurately, farmers should test the sensors that monitor the planter. If any of the monitoring systems are dysfunctional, they must be replaced.  


Trending Video

Agronomy & Autonomy - Drone Solutions for Agriculture with Pegasus Robotics

Video: Agronomy & Autonomy - Drone Solutions for Agriculture with Pegasus Robotics

Pegasus Robotics walks us through drone solutions for agriculture.

The XAG P100 Pro can carry 110 pounds in its dry hopper and can fly at 31 miles per hour. Its wet tank can hold 13.5 gallons (50 liters).

Pegasus Robotics is the exclusive XAG P100 Pro distributor for North America.

Watch to learn more about these drones and how it can help you on the farm!