Farms.com Home   News

Pesticide Load Estimation Using The Soil And Water Assessment Tool (SWAT) In The Sacramento And The San Joaquin Watersheds

Objectives
 
To provide quantitative information on pesticide loadings from the Sacramento and the San Joaquin watersheds into the Sacramento-San Joaquin Delta waterways using the Soil and Water Assessment Tool (SWAT).
  • Set up the SWAT model for the Sacramento and the San Joaquin watersheds
  • Calibrate and validate the model for streamflow, sediment and pesticide simulation
  • Quantify pesticide loadings into the Delta using the calibrated SWAT
  • Explore the possibility of simulating nitrogen load to the watersheds.
Background
 
 
The Sacramento and San Joaquin watersheds (Figure 1) receive thousands of pounds of pesticides annually in order to maintain high agricultural productivity. As a result, pesticide residues are routinely detected in the Sacramento and San Joaquin Rivers. These two rivers eventually drain into the Sacramento-San Joaquin Delta, thus influencing water quality in the Delta region. We used the Soil & Water Assessment Tool (SWAT) to quantify pesticide loading in these watersheds.
SWAT is a public-domain hydrologic modelling tool developed by USDA-ARS. Hydrologic models are increasingly used for environmental exposure and risk assessment. They are much more cost-effective than field measurements and can be used to quantitatively predict pollutant fate and transport under a variety of conditions. SWAT uses high-resolution data available from public agencies – information such as weather and climate, surface runoff, return flow percolation, evapotranspiration, transmission losses, pond and reservoir storage, crop growth and irrigation, groundwater flow, reachrouting, nutrient and pesticide loading, and water transfer.
 
Approaches
  1. Analyze pesticide use in the watersheds.
  2. Simulate the pesticide loadings from these two watersheds.
For our pesticide source data, we used the Pesticide Use Report (PUR) database from California Department of Pesticide Regulation (CDPR). This database has rich resolution for uses and use trends, both spatial and temporal. The data is available for full use reporting since 1990. SWAT also requires spatially distributed input data. Those data were obtained from public databases maintained by various government agencies (Table 1).
 
Table 1. Input and monitoring data sources
 
The total area of the Sacramento and San Joaquin watersheds, as defined in this project, is about 23 300 and 15 000 km2, respectively. The watersheds were divided into subbasins and further partitioned into Hydrologic Response Units (HRU) based on unique combinations of land use, soil, and slope (Figure 2). Figure 2 shows an example for the Sacramento watershed.
 
 
Results
 
Results show that the calibrated SWAT can successfully simulate streamflow, sediment, and presence of the pesticide diuron in both the Sacramento and the San Joaquin watersheds (Table 2).
 
Table 2. Summary of simulation results. Note: R2 (coefficient of determination) and NSE (Nash-Sutcliffe efficiency) are measures of the accuracy of model simulations compared to observations. Both range from 0 to 1, where larger values suggest better model performance. SAC: the Sacramento watershed; SJQ: the San Joaquin watershed.
 
This work is conducted in collaboration with the Delta Region Areawide Aquatic Weed Project (DRAAWP). This portion of the project is led by Dr. Minghua Zhang, Dept of Land, Air and Water Resources, University of California (UC), Davis. Collaborating with scientists from NASA, Mr. Mohammad Abdolahi and Ms Huajin Chen have been working on the project at the AGIS laboratory at UC Davis. Contact us for any potential questions.
 

Trending Video

Controlling pests and weeds in potato crops

Video: Controlling pests and weeds in potato crops

Corteva Agriscience™ is proud to offer an outstanding lineup of grower-focused products to manage pests and weeds in potato crops.