By Michael Langemeier
Center for Commercial Agriculture
The continued increase in size of tractors, combines, and other machinery has enabled farms to operate more acres and reduce labor use per acre. However, this increase in machinery size also makes it increasingly important to evaluate the efficient use of machinery. A recent article documented the increase in machinery cost estimates during the last couple of years (farmdoc daily October 12, 2021). This article will discuss machinery cost and investment benchmarks, and illustrate the computation of crop machinery cost and investment for a case farm in west central Indiana.
Key Machinery Benchmarks
Crop machinery cost per acre is computed by summing depreciation, interest, property taxes, insurance, leasing, repairs, fuel and lubricants, and custom hire and rental expense; and dividing the resulting figure by crop acres or harvested acres. Interest should include both cash interest paid and an opportunity charge on machinery and equipment that is owned. In regions where double-cropping predominates, using harvested acres is preferable.
Crop machinery investment per acre is computed by dividing total crop machinery investment (i.e., investment in tractors, combines, and other machinery) by crop acres or harvested acres. Again, in regions where double-cropping is prevalent, using harvested acres gives a more accurate depiction of machinery investment.
Machinery investment per acre typically declines with farm size. Thus, it is important for farms to compare machinery investment per acre with similarly sized farms and to examine the trend in this benchmark for a particular farm. A farm with relatively high machinery investment per acre needs to determine whether this high value is a problem. If the farm faces serious labor or timeliness constraints, this benchmark may be relatively high. However, if this benchmark is high due to the purchase of assets used to mitigate income tax obligations or for some other reason, the farm needs to think about their long-term strategy with respect to purchasing machinery and equipment.
Case Farm Illustration
Crop machinery cost and investment per acre for a case farm in west central Indiana is presented in Table 1. This case farm has 1500 acres of full-season corn and 1500 acres of full-season soybeans. If this farm had livestock, the relevant machinery cost and investment figures for the livestock operation would need to be excluded from total machinery cost and investment to compute the values in Table 1. Machinery costs include depreciation, interest, insurance, repairs, and fuel and lubricant. This farm does not custom hire or lease machinery so the values for these items are zero in Table 1. Interest was computed using information pertaining to the farm’s term loan for machinery. Though it is often preferably to include opportunity interest cost in the computation of crop machinery cost, using the actual interest expense is more comparable to the benchmarks discussed below. In summary, the crop machinery cost per acre for the case farm was $99.53.
Using the Center for Farm Financial Management’s FINBIN database, Figure 1 illustrates the trend in machinery cost per acre from 2011 to 2020 for crop farms. The chart illustrates crop machinery cost for corn, soybeans, and the average for the two crops. Discussion will focus on the average for the two crops. Crop machinery cost peaked in 2013, reached a low in 2016, and has been increasing ever since. In 2020, the average machinery cost per acre for the two crops was $115. In comparison, the machinery cost for the case farm is relatively low.
To obtain some feel for how variable machinery cost is between farms, we compared the average machinery cost per acre for corn farms from 2016 to 2020 with the averages for corn farms in the low 20 percent group with respect to net return per acre and for corn farms in the high 20 percent group with respect to net return per acre. The five-year average crop machinery cost per acre for corn was $134. The low profit group had an average machinery cost per acre of $165 or 23.2 percent higher than the average machinery cost. In contrast, the high profit group had an average crop machinery cost of $120 per acre or 10.1 percent lower than the average machinery cost.
Crop machinery investment per acre for the case farm was $458. Figure 2 presents crop machinery investment per acre for farms with data included in the FINBIN database. Unlike the crop machinery cost computations which focused on corn and soybean production, the crop machinery investment computations incorporated into Figure 2 were for all farms categorized as crop farms. Crop machinery investment peaked in 2014 at $578 per acre, and then declined to $521 and $522 in 2019 and 2020, respectively. Why did average machinery investment per acre decline? We don’t have a specific answer to this question. However, the fact that capital purchases were relatively strong from 2007 to 2013, and then declined as net farm income weakened, is an important factor explaining the trend in crop machinery investment per acre. The crop machinery investment per acre for the case farm is relatively low compared to the FINBIN average for 2020 of $522 per acre.
otential variability in crop machinery investment per acre was examined by comparing average machinery investment per acre to averages for farms in the low and high 20 percent groups in terms of net farm income. Again, data from 2016 to 2020 were utilized. The five-year average crop machinery investment per acre was $540. Farms in the low 20 percent group had an average machinery investment per acre of $626 or 15.9 percent higher than the average machinery investment. In contrast, farms in the high 20 percent profit group had an average machinery investment per acre of $490 or 9.3 percent lower than the average machinery investment. In addition to examining machinery investment per acre for the two profit groups, we examined machinery investment benchmarks for crop farms. Farms in the 30th percentile, meaning that 30 percent of the farms had values higher than this group, had an average machinery investment per acre of $828, while farms in the 70th percentile had an average machinery investment per acre of $288. When interpreting the average for the 70th percentile, a word of caution is in order. Farms with very low crop machinery investment values tend to have older machinery that is largely depreciated out. Whether these farms can continue operating with this machinery for several more years is an open question.
Finally, it is important to note that the case farm has strong labor benchmarks. Gross revenue per worker is approximately $1,060,000 for the case farm. In addition, the ratio of total labor expense (hired labor plus family and operator labor) as a percentage of value of farm production is only 5.9 percent. Given the potential tradeoff between labor cost and machinery cost, it is often important to compute both labor and machinery benchmarks.
This article defined, described, and illustrated crop machinery cost and investment benchmarks using a case farm in west central Indiana. The case farm had values that were below the specified benchmarks or targets. In order to more fully gauge farm efficiency, it would be helpful to also compare the farm’s profitability and financial efficiency ratios to farms of the same type and similar in size.Source : illinois.edu