Farms.com Home   News

Cool Those Bins of Hot Canola


Cool Those Bins of Hot Canola

Canola combined during hot weather forecast for this week should be put on aeration to cool it down and prevent heating.

Canola harvested in very hot weather has to go on aeration to cool it off. Even if dry, hot canola can start to heat and spoil within weeks.

Canola at 10% moisture is at risk of spoilage when put in the bin at 20 C. “At temperatures above 30 C, which was the harvest temperature for a lot of canola binned over the past couple weeks, the spoilage risk is that much greater,” says Kristen Phillips, agronomy specialist with the Canola Council of Canada.

Even canola binned at moisture contents below 8% may still be at risk at these high temperatures, Phillips adds.

Green seeds and dockage, including canola plant material, weed material and insect parts, create additional start points for heating and can make the situation worse.

All canola should be conditioned immediately after harvest. “Conditioning” involves the movement of air through seed to ensure safe storage over a period of time. The basic recommendation is to put canola into aeration bins immediately after harvest and turn the fans on until canola has cooled to 15 C. If aeration bin space is not available, keep moving the canola from bin to bin until it cools.

“The act of augering canola from one bin to another will circulate air through the seed, cool it off and remove any developing hot spots,” Phillips says. “In fact, this practice is also useful for canola that has been on aeration. Moving canola after a couple weeks on aeration adds another level of security to make sure the highly valuable crop is safe.”

Monitor canola throughout the aeration process to make sure the temperature is coming down. Bin temperature cables simplify the monitoring process. If temperatures stop falling or worse, start rising again, this is a bad sign that heating may have begun. Empty the whole bin to break up hot spots and cool off the mass, then put the canola back on aeration.

If growers are concerned about the safety of canola binned hot or tough or with high green counts, they may want to consider early delivery to the elevator or crush facility. Check your options.

“The first 4 to 6 weeks after putting the canola in the bin is the most critical time,” Phillips says. “Don’t forget about your stored canola while tending to your other harvest duties. It could be a very costly oversight.”


Source: Canola Council of Canada


Trending Video

Sclerotinia and Lygus in Seed Canola: Field Update with George Lubberts, CCA | Enchant, Alberta

Video: Sclerotinia and Lygus in Seed Canola: Field Update with George Lubberts, CCA | Enchant, Alberta

Join Certified Crop Advisor George Lubberts for this Prairie Certified Crop Advisor (Prairie CCA) field update from Enchant, Alberta. In this 12th video of the series, George takes us into a seed canola field where the male rows have been removed and the female plants are filling pods. This video was taken in the third week of August 2025.

George discusses the early signs of sclerotinia stem rot, explaining how infection begins in the stem, impacts pod development, and leads to premature ripening. He also shares insights on lygus bug management, including timing of spray applications to minimize feeding damage and maintain seed size and quality.

With cool, damp summer conditions, George notes that while disease pressure is present, overall field health remains good. The crop is just beginning to show early seed colour change, signaling progress toward maturity.

Topics Covered:

•Sclerotinia stem rot identification and impact

•Managing lygus bugs in seed canola

•Crop stage and seed colour change observations

•Timing insecticide sprays for optimal protection

•Insights from a CCA field perspective in southern Alberta