With the release of software update 2013-1, John Deere Ag Management Solutions (AMS) provides following information:
NOTE: This announcement serves as an abbreviated version of the full release information. See release notes located at John Deere StellarSupport™ for more detailed technical information.
John Deere Guidance
John Deere AutoTrac™ Adaptive Curve gap fill
When operating with documentation as the selected source for John Deere Adaptive Curve generation,
John Deere Adaptive Curve mode will now connect line segments, even when documentation is briefly disabled.
If a John Deere header is briefly raised on a self-propelled forage harvester (SPFH) or combine, John Deere Adaptive Curve mode will now fill in the distance between the two guidance line segments.
John Deere AutoTrac Circle Track distance to center
A distance-to-center calculation has been added as an optional feature for John Deere Circle Track on the
John Deere GreenStar™ 3 2630 Display. This feature is a real-time calculation of current distance from the center of the pivot. This feature enables John Deere Circle Track customers to identify the outermost guidance line of their circle and work inward.
Competitive guidance line creator
Producers who originally created straight track guidance lines with competitive systems can now create new guidance lines on the John Deere GreenStar 3 2630 Display. The lines created use similar calculations that created the competitive lines. This feature is designed to acknowledge differences in how
John Deere and non-John Deere guidance lines are calculated, allowing producers to use John Deere AutoTrac in situations previously not feasible.
NOTE: This feature is not a converter and does not allow for non-John Deere guidance lines to be imported into the John Deere GreenStar 3 2630 Display.
Swap Track enhancements.
Swap Track can now swap between four existing guidance lines within the same field on the
John Deere GreenStar 3 2630 Display. Users can now rearrange the order of the tracks while John AutoTrac is engaged.
John Deere Machine Sync speed sensitivity
New John Deere Machine Sync settings for the follower allows the operator the ability to adjust the sensitivity of the speed of the machine to enable optimal follower performance. Being able to correctly adjust sensitivity improves overall John Deere Machine Sync performance and steering stability.
Field and crop management
John Deere Mobile Weather wind speed averaging
Wind-speed averaging is a new feature that calculates an average wind-speed value to help control how the wind speed value changes when refreshed on the display. The operator can now set the average wind speed calculation time to a value between 1 to 30 seconds. Longer intervals should reduce fluctuations in the displayed wind speed.
Click here to see more...