Home   News

The John Deere 450E Round Baler: Key Features and Specs

When you’re on the hunt for a round baler that can help you streamline your feeding system and increase your baling efficiency, the John Deere 450E might be the ideal solution. As a part of the Zero Series line of round balers, the John Deere 450E features DiamondTough™ belts and an automatic electric-tie option with the BaleTrak™ Pro monitor. This baler also has an adjustable hitch and a vertical forming chamber, which helps maintain bale density. It’s available in a net wrap or twine configuration, depending on customers’ needs.

john deere

What is the John Deere 450E Round Baler?

The John Deere 450E is a round baler, designed for operations of any size. As a part of the E Series, it is also specifically meant to fit into agricultural producers’ budgets without compromising on features. The 450E has a hydraulic system to control bale density, and it features four pickup bars with 72 teeth. Bales are produced with a width of 46 inches and can weigh approximately 1,000 pounds. The wrapping system of the 450E can also be preset to automatically produce bales of a specific size.

What Can the John Deere 450E Round Baler Do?

The John Deere 450E is designed for agricultural producers with operations spanning any size. The objective behind leveraging this machine is to boost productivity while baling. Customers can opt for either a net wrap or twine configuration, depending on their specific needs. With the net wrap configuration, users can expect to see up to a 75 percent reduction in bale wrapping time and an improvement in bale quality. The 450E also has the BaleTrak Pro monitor-controller, which gives users an automatic electric twine option, as well as an edge-to-edge net wrap option. The baler’s adjustable hitch can be moved to suit different tractor drawbar heights.

What Are the Important Features of the John Deere 450E Round Baler?

The John Deere 450E round baler has several important features that customers will want to familiarize themselves with before investing in the machine. By understanding the details of this piece of equipment, they can gain a better understanding of how it can potentially benefit their baling operations.

Adjustable Crank Handle

The adjustable crank handle of the John Deere 450E allows operators to position the pickup to the operating height they need to match crops or field conditions. Customers can also use a hydraulic pickup lift cylinder as an attachment to make it easier to transport or clear obstacles. The crank handle acts as a down stop and adapts to both regular and MegaWide™ Plus pickups.

Automatic Electric-Tie Option Using BaleTrak™ Pro Monitor

The automatic electric-tie option that can be used with the BaleTrak Pro Monitor is designed to alert operators when bales are near-full, full, and oversized. The 450E, in particular, allows users to adjust their twine settings directly from the cab with the BaleTrak Pro monitor. Additionally, the number of wraps can be set on the monitor while using the Edge-to-Edge net wrap option.

Adjustable Hitch

The adjustable hitch of the John Deere 450E round baler can match various tire sizes and be secured at different heights. The drawbar height can fall within 13 inches to 22 inches from the top of the drawbar to the ground. The pickup head can also follow the terrain without missing crops. There is no feed opening on the baler, meaning operators don’t have to worry about plugging.

Vertical Forming Chamber

As soon as hay enters the forming chamber of the John Deere 450E from the pickup, the belts work to create a densely packed core. Afterward, incoming hay feeds between the bale and lower gate roll, where it is compressed into smooth layers. Bale density is maintained throughout the entire process with the idler arm, which rises with bale growth. This forces oil from the hydraulic cylinder to move through a pressure-relief valve.

Exclusive DiamondTough™ Belts with Plate-Type Splices

The John Deere 450E round baler has a seven-inch-wide diamond-tread design, which helps grip bales to prevent slippage and chaffing. They are self-cleaning and staggered to limit the loss of material. Together, the belts enclose 91 percent of the bale width, which also helps to maintain the quality of the hay. Because of the staggered belt roll design, hay that falls under or behind the belts can be easily fed back into the baler. The design prevents buildup near the front of the machine as well.

DiamondTough belts are crafted through a triple-weave process using nylon and polyester. Their strength can handle heavy shock loads, and boast more tear and puncture resistance. The plate-type fasteners of the 450E are made of stainless steel, and its belt splices limit necessary maintenance. Because the loop area is cold forged, it is highly wear-resistant in the coupling area. The spring steel pin also locks into the splice connection without the need for external retainers.

Click here to see more...

Trending Video

Market to Market - July 21, 2023

Video: Market to Market - July 21, 2023

Wet weather in the East is offset by scorching temperatures in the West. The Black Sea grain deal is on hold. We’ll look at what’s next. Plus, drones deliver an unusual package to farmers. And, market analysis with Elaine Kub.